Amazfit GTS is a Smartwatch with the lifestyle switch for all your looks.

The customized 1.65-inch stylish square screen offers a larger display area than a round watch face of the same width, so it can carry more information.

Water-resistant to a depth of 50 meters, Amazfit GTS also supports multiple swimming scenarios.

Amazfit GTS combines software and hardware to deeply optimize the power consumption of the system and the components, in order to bring about a long-lasting endurance of 14 days while keeping a slim watch body, which enables you to avoid frequent charges.

How to Use

Product Specification

Dimension	43.25 x 36.25 x 9.4mm
Weight	Approx. 24.8g
Body Material	Aircraft-grade aluminium alloy, polymer material
Strap Material	Silicone
Strap Length	120 mm (long), 87 mm (short)
Water-Proof Rating	5 ATM
Display	1.65" AMOLED, resolution 348 x 442, 341ppi, 100% NTSC
Touch Screen	Corning Gorilla 3 generation tempered glass + anti-fingerprint coating
Bluetooth	BT5.0 BLE
Battery	220mAh lithium-ion polymer battery (typical value)
Charging Time	About 2 hours
Charging Method	Magnetic / 2-pins POGO pin
Sensors	BioTracker^TM PPG Bio-Tracking Optical Sensor 6-axis acceleration sensor 3-axis geomagnetic sensor Air pressure sensor Ambient light sensor
Application	Amazfit App
Accessories	Magnetic charging stand, user manual
Supported devices	Android 5.0 or iOS 10.0 and above

FAQs

Q. Why isn’t my Amazfit GTS charging?

A. 1. Check if the USB port, charging adapter, outlets or the charger is faulty. We recommend you charge it with your PC or phone charger (Rated input voltage: DC 5.0 V Input current: 500mA).

2. Check if the charging contacts on the back of the GTS or the charging pins on the charger are dirty.

If they are dirty, please use a cotton swab with rubbing alcohol to clean the charging contacts and charging pins. Please clean them thoroughly and make sure that no debris from the swab is left behind. Then, wipe with a dry cloth or tissue before charging.

Q. Why won't my Amazfit GTS connect/pair?

A. Please check the following steps to troubleshoot your issue:

1. Make sure your watch is fully charged.
2. IOS: Go to phone settings to find the Bluetooth setting and then remove all the devices. To do so, tap on the “i” icon and tap Forget all the devices.
Android: Go to phone Bluetooth settings to clear Bluetooth data
3. Toggle Bluetooth OFF
4. Reboot your phone
5. Toggle Bluetooth ON
6. Log out and then re-login the app
7. Uninstall and install the app
8. Try pairing again
9. Keep away from other Bluetooth devices and try again.
If still failed, please use another phone to have a try.

Q. Is Amazfit GTS waterproof?

A. Amazfit GTS has a water resistance rating of 5ATM under ISO standard 22810:2010. This means that Amazfit GTS may be used for shallow-water activities like swimming in a pool or ocean. It can’t be used when you are taking a shower/bath or diving into the water.

Note:

1. Avoid pressing buttons on the device while it is underwater. This could allow water to enter into the casing and damage the device. Wipe with a dry cloth or tissue to make sure the device is completely dry before charging it or operating the touch screen.

2. The watch does not have the waterproofing effect on liquids that are aggressive such as acidic and alkaline solutions, chemical reagents and the like. Damage or defects caused by misuse are not covered by the warranty.

Q. Why the watch does not remind me even I have turned on heart rate alert?

A. You must match the following two points:

1. Turn on automatic heart rate detection, set detection frequency to 1 minute;

2. Over the alert value that you set, and you do not have an exercise in the past 10 minutes.

Review Your Cart

Gift for Her

Customer Login:

Review Your Cart